Excellent Cuttability Fiberglass Rebar

It should be noted that when cutting glass fiber reinforced bars, attention should be paid to safety, to avoid dust and other harmful substances, and the accuracy and quality of cutting must be guaranteed, otherwise the use effect and safety may be affected.

Inquiry now

Product Details

Products Description:

FRP (Fiber Reinforced Polymer) rebars are a type of reinforcement bar used in construction that is made of composite materials consisting of high-strength fibers embedded in a polymer matrix. FRP rebars offer several advantages over traditional steel reinforcement, including higher strength-to-weight ratio, corrosion resistance, and non-magnetic properties.

Feature:

High Tensile Strength: The load is approximately double that of a steel bar with the same diameter

Low Weight: The labor intensity is greatly reduced, and the transportation cost is reduced at the same time;

Anti static: It has noelectrical conductivity, and no sparks will be produced when being cut. It is particularly suitable for high gas zones;

Non-flammable: It is non-flammable and has high thermal insulation;

Cuttability: It avoids damages to cutter heads,and does not delay excavation

Save cost: Use this material as reinforcing bars for road and bridge, could reduce Secondary repair cost.

Product Specification
Specification	yft100-25-12	Name	Hollow Rockbolt

Item	Unit	Permissible Deviation	Standard Parameter
Outer Diameter (Da)	mm	±0.5	25
Measure Bottom Diameter (Db)	mm	±0.5	22.6
Diameter of the hole	mm	±0.5	12
Effective Diameter (Dd)	mm	±0.5	22
Screw Pitch (P)	mm	±0.2	10
Rod Length (L)	mm	±10
Active Section	mm²	—	267
Weight	g/m	±25	640
Fiberglass Content	%	±5	80
Density	g/cm³	±0.1	2
Ultimate Load-bearing	kN	≥	220
Ultimate Tensile Strength	MPa	≥	820
Shear Strength	MPa	≥	150
Elastic Modulus	GPa	≥	40
Ultimate Strain	%	≥	1.2
torsional strength	N·m	≥	100
Nut bearing capacity	kN	≥	100

Hot Tags :

leave a message

For any request of information or technical support, fill in the form. All fields marked with an asterisk* are required.

Subject : Excellent Cuttability Fiberglass Rebar

sample options

categories

Featured products

Related Products

Glass Fiber Reinforced Polymer (GFRP) Rebar

Glass fiber reinforced polymer (GFRP) rebar the major advantages of being a lightweight and corrosion-free alternative to steel reinforcement. GFRP rebar offers high tensile strength, stiffness-to-weight ratio, solid resistance to corrosive chemicals, electromagnetic neutrality, excellent fatigue properties, and control over thermal expansion.

Lightweight - corrosion resistant GFRP rebar

GFRP rebar is a lightweight corrosion resistant rebar made using glass fiber reinforced polymer (GFRP). Compared with traditional steel bars, GFRP steel bars have many advantages, such as high strength, light weight, corrosion resistance, non-conductive, non-magnetic and easy processing, etc. In addition, GFRP steel bars also have good insulation properties and fatigue properties, which can maintain strength and stiffness during the life cycle. GFRP steel bars are widely used in a wide range of applications, especially in concrete structures, such as bridges, tunnels, docks, underground facilities, houses, etc. Compared with traditional steel bars, GFRP steel bars perform well in terms of tensile, compressive and bending resistance, and are more resistant to corrosion, and are better used in high humidity and marine environments.

Corrosion Resistance GFRP Rock Bolts

GFRP Rock Bolts have a high corrosion resistance under acid conditions and are well suited for permanent support. The improved flexibility of long tendons is well suited for application without couplings in confined locations.

Lightweight GFRP Hollow Rockbolt

GFRP hollow rockbolt is mainly used as grouting anchor, use cement&resin and other material as adhesives, could bonding main item with rockbolt, improve support ability.

Excellent Cuttability Fiberglass Rebar

At present, the glass fiber reinforced bars on the market already have good cuttability. Due to the light weight and toughness of the material itself, some traditional cutting tools, such as electric saws, steel hammers, and pliers, can be used for processing. In addition, there are also some special fiberglass rebar cutting tools, such as abrasive cutting machines, electric saw cutting machines, etc., which can be cut more conveniently and quickly. It should be noted that when cutting glass fiber reinforced bars, attention should be paid to safety, to avoid dust and other harmful substances, and the accuracy and quality of cutting must be guaranteed, otherwise the use effect and safety may be affected.

High Temperature Corrosion Resistant Glass Fiber Reinforced Polymer Bars

Glass fiber reinforced polymer bars are a high tensile strength alternative to steel reinforcements. It has strong corrosion resistance and can greatly extend the service life of concrete structures.

Contact Us