High Tensile Strength GFRP Bars

GFRP bars are anti-corrosive materials that allow constructing any element with keeping the minimum cover in severe or extremely severe environmental conditions. GFRP bars are available in every standard size.

Inquiry now

Product Details

Products Description:

GFRP rebar are tendons made of resin and high-strength fiberglass composite materials. It is a building material with light weight, high strength, flame retardant, corrosion resistance and insulation properties. GFRP bars are widely used in concrete structure reinforcement, geotechnical engineering, marine engineering, bridge engineering, water conservancy engineering, mining and other fields, and can meet the requirements of the electrical field, such as cable supports.

GFRP Bars Advantages:

1. Light weight: GFRP bars weigh only about 1/4-1/5 of the same specifications as steel bars, which greatly reduces the self-weight load of concrete structures.

2. Corrosion resistance: Unlike steel bars, GFRP bars will not be affected by moisture, acid, alkali, salt, etc., and other corrosive environments, and will not rust or wear.

3. Good insulation: GFRP bars have good insulation properties, which can eliminate the current path in the concrete structure and prevent the formation of electrochemical effects.

4. Good plasticity: GFRP bars have good plasticity and can meet the needs of various complex structural parts.

5. High tensile and compressive strength: The tensile and compressive strength of GFRP bars is higher than that of ordinary steel bars, which can improve the force bearing capacity of the structure.

Product Specificatin
Specification	yft100-10	Name	GFRP Rebar

Item	Unit	Permissible Deviation	Standard Parameter
Outer Diameter (Da)	mm	±0.5	10
Effective Diameter (Dd)	mm	±0.5	9
Rod Length (L)	mm	±10
Active Section	mm²	—	64
Weight	g/m	±5	150
Fiberglass Content	%	±5	80
Density	g/cm³	≥	2
Ultimate Load-bearing	kN	≥	60
Ultimate Tensile Strength	MPa	≥	1000
Shear Strength	MPa	≥	150
Elastic Modulus	GPa	≥	145
Ultimate Strain	%	≥	1.2

Hot Tags :

leave a message

For any request of information or technical support, fill in the form. All fields marked with an asterisk* are required.

Subject : High Tensile Strength GFRP Bars

sample options

categories

Featured products

Related Products

High Tensile Strength GFRP Bars

High Strength Insulation Fully Threaded GFRP Rock Bolts

GFRP rock bolts are a type of reinforcement used in geotechnical engineering and mining applications. It has the characteristics of light weight, high strength, insulation and corrosion resistance.

Fiberglass bolts and anchors for slope and face stabilization

Fiberglass bolts and anchors are reinforcement materials used for stabilizing slopes and working faces. They are made of high-strength fiberglass and resin, and have excellent corrosion resistance, tensile and shear strength. Fiberglass bolts are mainly used for support and reinforcement in geotechnical engineering. They are usually fixed in rocks or soil mounds by drilling holes, and the reinforced support system is connected with bolts to prevent landslides and landslides. They can be used outdoors and indoors, and are easy to install and remove. Fiberglass anchors are similar to bolts, but they are embedded directly into the ground for reinforcement. This reinforcement method is suitable for underground coal mines and tunnel engineering, and can improve the stability and safety of geological engineering. Compared with steel anchors, fiberglass anchors have the advantages of light weight, high strength and corrosion resistance, while reducing construction and maintenance costs. It should be noted that when selecting and using fiberglass bolts and anchors, it is necessary to consider the actual working conditions and support needs, select models and specifications reasonably, and construct in accordance with relevant requirements and standards during installation and use to ensure that they are Stable and safe.

Contact Us